Wireless Irrigation Control System For Intelligent Agriculture
Automatic Valve controller
A solenoid latching valve controller is a device that is used to
control the operation of solenoid latching valves, which are
commonly used in irrigation systems, water treatment systems, and
other industrial applications. Here are some advantages of using a
solenoid latching valve controller:
1. Energy Efficiency: Solenoid latching valve controllers operate using very low power,
making them highly energy-efficient. They use a small amount of
power to activate the solenoid valve and then require no power to
maintain the valve's open or closed state.
2. Long Lifespan: Solenoid latching valve controllers have a long lifespan, as they
are designed to operate with minimal wear and tear. This means that
they require less maintenance and are less likely to fail, which
can save time and money.
3. Fast Switching: Solenoid latching valve controllers can switch the solenoid valve
on and off quickly, which is important in applications where fast
response times are required. This allows for precise control of the
system and can improve overall system performance.
4. Compatibility: Solenoid latching valve controllers are compatible with a wide
range of solenoid latching valves, making them versatile and
flexible for different applications.
5. Easy Installation: Solenoid latching valve controllers are easy to install and can be
integrated into existing systems with minimal disruption. They are
typically compact and lightweight, which makes them easy to mount
in tight spaces.
6. Precision Control: Solenoid latching valve controllers can provide precise control
over the operation of the solenoid valve, which can help to
optimize system performance and reduce water waste.
Lensen can provide this kind of wireless irrigation controllers. We
design and produce these controllers
| Parameter |
| Power output: | 1W |
| Power supply: | 12.6V DC |
| Control distance: | 2km LOS |
| Baud rate: | 2400bps |
| Receiving sensibility: | -123dBm@1200bps, -118dbm(9600bps) |
| Networking |
| Networking: | Point to point and point to multipoint |
| Protocol: | Modbus RTU protocol |
| Port Description |
| Input | 5AI (4-20mA) |
| Output: | 4 pulse output |
| Communication port | TTL |
| Current |
| Transmit current: | <400mA |
| Receiving current: | <40mA |
| General |
| Frequency: | 433MHz |
| Channel No: | 16 channels, can change via DIP switch |
| Physical Properties |
| Dimension: | 115×90×40(mm) |
| Antenna Connector: | SMA,vehicle antenna with 1.5m cable |
| Temperature: | -35℃~+75℃( industrial) |
| Mounting method: | Standard 3.5 inch industrial guild rail |
